TS-LS Joinery System

FINNS NU ÄVEN I MILLIMETER

Standard storleken LS32-TS Passar sågar med ett djup på 710 mm eller mindre.

Sågar med ett djup på 725 till 850 mm djup Part Number: TS-LS-WF-XL

För millimeter Part Number: TS-LS-WF-XL-M

INCRA TS-LS Joinery System Shown Here with Table Saw and Two Optional Router Table Extension Wings
Part Number: LS32-TS-WF

Part Number: LS32-TS-WF-M Metric

The NEW INCRA TS-LS offers the one thing that every table saw fence should have, but none of them do, namely, Automatic Positioning Control. All other table saws doepend on a tape measure and your eyesight to position your work. That's why all table saw users are resigned to the fact that a good cut requires
long set-up times and endless trial and error. The INCRA TS-LS completely eliminates the need for these tedious processes by using INCRA'S patented lead screw technology to position your work instantly and automatically to within 0.002".
Even better, if you want to repeat a cut, you can return to any former position in less than 5 seconds with ZERO repeatability error. This kind of accuracy and perfect repeatability are luxuries that woodworkers could only dream about before the INCRA TS-LS. And because of its structural design, centrally placed carriage, and optimized side mounted clamping system, the entire unit virtually welds itself together into one solid block of steel and aluminum when locked in place. The result is exceptional strength, rigidity and stability.

True machine shop accuracy ... Perfect repeatability ... Exceptional strength.
Will the INCRA TS-LS fit on my table saw? The INCRA TS-LS will fit directly on just about any standard 10" table saw, typically without any drilling or tapping. There are only two things you need to check to make sure that it will fit your saw:
1. The length of miter gauge slot (front-to-back distance of table). If this measurement is 28-1/2” or less (standard for most 10" table saws), the standard INCRA TS-LS will fit your saw. If this measurement is between 28-1/2” and 33”, the TS-LS System can be ordered with a longer fence extrusion and base support panel for a nominal charge as a substitution for the standard-length components.
2. The front and rear surfaces of the saw. These surfaces must be flat and square to the top, with at least two holes in each surface. Hole locations and diameter are unimportant because INCRA's universal rail mounting brackets will work with any hole pattern a wide variety of hole sizes. See the TS-LS Compatibility Chart for more information regarding the TS-LS & TS Router Table installations.

TS-LS Specifications:

Positioning range - right of blade: 32"

Positioning range - left of blade: 16"

Positioning accuracy: .002" over full range

Repeatability: Return to any former position in less than 5 seconds with
ZERO repeatability error

36" Heavy duty rip fence with T-slots on front and top

LS32-WF Specifications:

INCRA LS Positioner 32" Range

INCRA'S Patented Steel Lead Screw

Micro Adjust Wheel with Rotating Bezel and Quick Action Cam Clamp

Incremental Positioning in 1/32" Steps

Continuous Micro-Positioning with Audible Dentent Every 1/1000"

Automatic Work-Centering Scale

Solid Steel and Aircraft Grade Aluminum Construction Throughout

Engraved 32" Stainless Steel Magnetic Scale

Hairline Cursor and "Big View" Optical Window

Hardware packs and fully illustrated easy instruction manuals

Right Angle Fixture

INCRA Shop Stop

Master Reference Guide with 51 Templates

Wonder Fence Heavy Duty Split Fence

Hi-Rise Fence Cap

Clicka här för att se INCRA's

Table Saw Fence Video in Windows Media Video format.

Ladda ner Manual till TS-LS

Five Sliding Scale
Template Channels
Two of the channels are used for primary (distance from the cutter) and floating (distance from the last cut) reference scales. The 32" stainless steel scale fits in another channel leaving two more for your choosing. These scales combined with Incra's patented positioning racks allow you to return to any former position in less than 5 seconds with ZERO repeatability error. After setup, you also get perfect measured cuts just as fast.

Easy On, Easy Off Dismounts for cross-cutting operations and remounts in less than 10 seconds. This also makes it easy to use INCRA precision on both sides of the blade. The positioning range is 32" to the right and 16" to the left of the blade. The new TS-LS removes exactly the same way as the TS Ultra shown here.

These "saddle" brackets not only allow fast dismounts, the clever design of INCRA's centrally placed carriage literally forces the fence into perfectly parallel alignment at any position. These brackets also rise above the table saw surface to allow movement almost anywhere along the 72" rails in either direction.

The fence skims above the table on whisper smooth glides, eliminating all fence to table contact.

Quick, Easy Installation
Universal mounting brackets virtually guarantee compatibility with any 10" table saw, with no drilling,
no tapping and no modifications.

82-Minute
Instructional DVD
Setup and operation of woodworking's most accurate fence system, plus learn the easy way to cut all of your favorite joint types.

The INCRA Master Reference Guide
and Template Library
The Master Reference Guide comes complete with 51 interchangeable templates. This oversized 11" wide by 17" high book is fully illustrated and clearly written. With numerous examples it will help you create any one of thousands of possible joinery styles.

Whether you are creating complex or simple joinery, you will be thrilled with the creative possibilities offered by these reference templates when used with your Incra positioning unit.