|
 
|
  
Part Number: RT2743OS |
 |
| |
|
 |
| Part Number: RT2436OS |
|
| |
|
 |
| Part Number: RT2432CM |
|
Free Standing Router Table Tops
All of INCRA's new lineup of heavy duty router table tops feature a 1-1/4" MDF substrate with a high pressure horizontal grade phenolic laminate top and bottom. With a total thickness of 1-3/8", these tops are designed to support even the heaviest of production routers and lifts, and will work with any standard 9-1/4" x 11-3/4" mounting plate.
Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, Incra's plate leveling system puts flat head levelers in the table, not in the router mounting plate. Access to these levelers is through the 10 access holes located around the perimeter of the mounting plate. Just insert the hex key in the access holes and turn to adjust. After leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess.
All INCRA Router Tables are shipped with a 3/8" solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive Magna-Lock magnetic throat plate system. Changing any of the included throat plates is a snap with the Magna Lock System. Just drop in the selected plate. The high energy, rare-earth magnets hold the plate secure and perfectly flush every time. All of our mounting plates include 3 laser cut throat plates with a 1", 2-1/8" and 3-5/8" opening.
Note: Specify your router preference when placing an order with your Incra dealer. (See models listed below) |
| |
Model# |
Fits Routers |
| |
MLP1613-AL |
Bosch 1613 |
| |
MLP1619-AL |
Bosch 1619 |
| |
MLP3612C-AL |
Makita 3612C |
| |
MLP621625-AL |
Bosch 1611EVS, DeWalt 621, 625, Fein RT1800 |
| |
MLP690890-AL
|
PC 690, 890, 7529, Makita 1101, Bosch 1617, 1618
Milwaukee 5616, Dewalt 618 |
| |
MLP7518-AL |
PC 7518, 7539, Triton TRC-001, M0F-001KC |
| |
MLPFT2000-AL |
Freud FT-2000 |
| |
MLPM12V-AL |
Hitachi M12V |
| |
MLPUNDRILLED-AL |
Undrilled | |
| Available in 3 sizes for a free standing application. The 24" x 36" offset style table is a compact choice perfect for the LS-Positioner 17" model, the Ultra 16 or the Ultra Lite. The larger 27" x 43" offset style is the best choice for the LS-Positioner 25" model and the Ultra 24. The larger work envelope of the 27" x 43" is favored by many for use with the smaller range positioners as well. And all of our offset style tables are factory pre-drilled for mounting the LS Positioner direct. The 24" x 32" center mount table is a good choice if you are interested in using the Wonderfence37 fence without a positioner. |
|
|
| |
|
|
 |
|
In the table plate
leveling system.
|
|
|
|
3/8" x ¾" T-Slot
Miter Channel.
|
 |
|
Cam-Lock 1/4 turn
plate locking.
|
 |
|
Solid Aluminum
Mounting Plate
w/Magna Lock Throat
plate System. |
|
|
Incra Mast-R- Lift
upgrade - Substitute
the Incra Mast-R-Lift for
the standard mounting
plate and save $40.00
on the combined
purchase.
|
ML Ring Set - Set of 8 reducer rings as follows: 3/8", 5/8", 7/8", 1-3/8",
1-5/8", 1-7/8", 2-5/8",
and 3-3/8".
|
 |
|
TS Leg Set. |
|
